PARAMETER: SRAC-14SH

About Model:

• Type of AC: Split, Fixed Speed, Cooling Only

• Product Selling Area: Bangladesh

Capacity:

• Cooling Capacity: 3517 W

• Heating Capacity: N/A

Operating Conditions:

• Power Supply:

  • Rated Voltage & Phase: 230V, Single Phase

  • Rated Frequency: 50 Hz

• Running Conditions:

  • Withstanding Operating Temperature: 20–43°C

  • Cooling Area: 90–120 sq.ft

  • Lowest Running Voltage: 170 V

  • Highest Running Voltage: 264 V

• Cooling Capacity at Rated Condition: 3517 W

• Power Consumption at Rated Condition: 1260 W

Performance:

• SEER/EER/COP: 2.8 W/W

• Cooling Input Current: 5.6 A

• Max Input Current: 9.2 A

Indoor Unit Information:

• Air Flow (High): 600 m³/h

• Noise Level (High): 43.95 dB(A)

• Dimensions (L×W×H): 844 × 296 × 220 mm

• Packing (L×W×H): 910 × 365 × 285 mm

• Weight (Net/Gross): 11 ± 0.5 Kg / 13 ± 0.5 Kg

Motor:

• Type: Single Phase Induction (PG)

• Mechanical Output: 25 W

• Capacitor: 1.5 µF

• Indoor Fan Speeds (Turbo/High/Medium/Low): 1300 / 1250 / 1100 / 1000 r/min

• Thermal Protector: Yes

Fan:

• Dimensions (Dia × Length): Φ97 × 648 ±1 mm

• Blade Material: SAN 30% GF

Evaporator:

• Rows × Tubes: 2 × 14

• Tube Pitch (a × b): 21 × 12.7 mm

• Hairpin Copper Tube Length: 691 mm

• Tube Specification: OD Φ7.0 × 0.25 + 0.18 IGT mm

• Tube Material & Grade: DHP Copper, C12200

• Fin Spacing: 1.2 mm

• Fin Type: Louvered

• Fin Material: Aluminum (Hydrophilic Golden Coated)

Control Board:

• Transformer Base/SMPS Base: SMPS

• PU/Protective Layer: PU

• EMI/EMC Compatible: No

• Display PCB: LED Digit Display

• Swing Motors: 2 (Left/Right, Up/Down)

• Temperature Sensors: 2 (Air Inlet, Evaporator Inlet)

Other Features:

• Filter Type: Mesh Filter

• Power Cord & Plug: Yes, 1.5 m

• Connecting Wire Between IDU & ODU: 3.5 m

• Connecting Tube (CU with Insulation): 3 ± 0.05 m

Outdoor Unit:

• Noise Level (Turbo/High): 54.4 / 54.3 dB(A)

• Dimensions (L×W×H, including foot & service): 844 × 310 × 546 mm

• Packing (L×W×H): 900 × 372 × 610 mm

• Weight (Net/Gross): 28 ± 1 Kg / 32 ± 1 Kg

• Max. Discharge/Suction Pressure: 4.20 / 1.20 MPa

Compressor:

• Preferred Model: ASG130GV-A7AU

• Type: Fixed Speed

• Inverter Frequency Range: N/A

• Locked Rotor Amp (LRA): 31 A at 240 V

• Thermal Protector: Yes

• Overload Protector: Internal

• Capacitor (If Applicable): 40 µF

Outdoor Fan Motor:

• Type: Single Phase Induction

• Mechanical Output: 25 W

• Capacitor: 2.5 µF

• Speed: 850 r/min

• Thermal Protector: Yes

• Fan Dimensions (Dia × Height): Φ400 × 115 mm

• Number of Blades: 3

• Blade Material: ABS 20% GF

Condenser:

• Rows × Tubes: 1 × 11

• Tube Pitch (a × b): 21 × 12.7 mm

• Coil Length: 820 mm

• Tube Diameter: OD Φ7.0 × 0.25 + 0.18 IGT mm

• Tube Material & Grade: DHP Copper, C12200

• Fin Type: Slit

• Fin Spacing: 1.2 mm

• Fin Material: Aluminum (Hydrophilic Golden Coated)

• Expansion Device: Capillary (Copper Tube)

PCB:

• Protection / PU Layer: NA

• PFC (Active/Passive): NA

• Temperature Sensors: NA

Refrigerant:

• Type: R-410A

• Quantity: 0.7 KG

Remote Control:

• Yes, IR Based

• Frequency: 16 MHz

• Operating Range: 8 m

• Display: LCD

Packaging:

• Ply: 5

• GSM: Indoor 908 ± 10, Outdoor 936 B+C

• Bursting Strength (BS): 160–180 psi

• EPS (Thermocol) Locations:

  • IDU: Two Sides

  • ODU: Bottom & Top